ROOTT system dental implant instrument set includes all the necessary components for fast and easy bone preparation for implant placement.

Material

All the drills are made from a material intended for the manufacture of high-precision medical instruments with increased resistance to corrosion.

 

Marking

Each drill has an indication of REF, which correspond to its size. Pilot and universal drills have an additional horizontal marks, which correspond to the length of the drill.

 

Dental implant instruments - SS-1.4197
D2020 Implant surgery drills
Dental implant instruments - Drill

Dental implant instruments - d1508 Initial drillD1508

Initial drill

Pike-shaped, is designed for easy-initiating drilling to prepare a hole of 1.5 mm diameter and 8 mm depth, preventing undesired pilot drill sliding at the moment bone contact.

Dental implant instruments - D2012 Pilot DrillD2012

Pilot drills

Are needed to prepare a hole of 2 mm diameter and 16 mm depth, which makes it possible to use the forming drill of the first size and the appropriate length or the first DSTEP1 universal drill. Pilot drill with stoppers are available in 8, 10, 12, 14, 16 mm lengths.

Ø2mm
8 mm D2008
10 mm D2010
12 mm D2012
14 mm D2014
16 mm D2016
20 mm D2020

Dental implant instruments - Form drill, sizes table

Form drills

Are necessary for preparation of the hole corresponding to configuration of the implant after applying a pilot drill of the appropriate length. For cases of drilling in hard bone it’s necessary to use the next drill size or DSTEP2 cortical drill. The principle of cutting for form drills corresponds to the one of the reamers. All drills are color-coded for length and width.

Dental implant instruments - Universal drills, long and short

Universal drills

Designed for experienced users able to control drilling depth using horizontal marks on the drill. The combination of pilot drills with two universal drills of special configuration allows to place any implant with a special protocol.

Guide pin


P2

Punch

TP4

Ø4.00 mm

TP5
5.00 mm

TP6
6.00 mm

Depth measuring gauge

Dental implant instruments - DPG Depth measuring gaugeDPG

Drill extender


ET

ROOTT system has all the necessary tools for easy and controlled implant insertion into a prepared hole.

Holding key

To control and maintain implant direction during insertion procedure.

Dental implant instruments - DW+DWPin Holding Key

Ratchet wrench

Dental implant instruments - RW Ratchet wrenchRW

Torque wrench

Dental implant instruments - TW Torque wrenchTW50

Dental implant instruments - CRE Insertion tool for external platform

Insertion tool for external platform

applied for implant insertion with TW50 torque wrench or a handpiece
with a force of up to 40 Ncm after initial positioning with combined carrier.

Dental implant instruments - ITE Insertion tool for external platform

Dental implant instruments - R3808 Insertion tool for internal platform

Insertion tool for internal platform

Applied for implant insertion with a torque wrench Tw50 or handpiece. To be able to use insertion tool for internal platform must be removed fixing screw and screwed abutment removal tool (SR), after which to the implant can be applied bigger torque to reach required depth of implant placement.

IT Insertion tool for internal platform

ROOTT system special set of keys and screwdrivers makes it simple and predictable to work with suprastructures.

Holding key

for easy gingival former transfer
and placement in the implant interface.

Dental implant instruments - GFC+IFG Suprastructure Holding key

Dental implant instruments - SDM Hex manual screwdriver
SDM SDML

Hex screwdriver, manual

For convenient and fast work with a surgical screw and gingival formers. Hexagon taper allows to securely fix a screw on the screwdriver and prevent falls. Available in short (SDM) and long (SDML) versions.

Dental implant instruments - SDH Hex screwdriver for angled handpiece
SDH SDHL

Hex screwdriver for angled handpiece

for convenient and fast work with a surgical screw, gingival formers and abutments. Hexagon taper allows to securely fix a screw on the screwdriver and prevent falls. Available in short (SDH) and long (SDHL) versions.

Dental implant instruments - SD Hex ratchet screwdriverSD SDL

Hex ratchet screwdriver

for convenient and fast work with a surgical screw, gingival formers and abutments. Hexagon taper allows to securely fix a screw on the screwdriver and prevent falls. Available in short (SD) and long (SDL) versions.

Dental implant instruments - SR Suprastructures removal tool
SR

Suprastructures removal tool

used for simple removal of gingival former, abutment and carrier which were fixed in the implant or implant analog with a force. To use the tool a fixing screw must be removed and suprastructures removal tool must be screwed.

Designed for experienced professionals who appreciate minimalism and simplicity of the surgical protocol. Due to pilot drills marking and universal drills special configuration bone bed preparation is possible in accordance with the inner cone implant, which requires more attention and expertise. The kit contains all the necessary tools for all types of ROOTT implants installation.

Dental implant instruments - TRS kit

Dental implant instruments - pilot drills

Dental implant instruments - universal drills

Dental implant instruments - form drills

Ratchet wrench

Dental implant instruments - RW Ratchet wrenchRW

Special Set consist of 6 compressive screws from Ti6Al4V, 2 drills, torque wrench, plastic tray with 2 optional space for hand piece instrument and 2 optional space for ratchet instrument.

 

Set can be used as:

  • Bone expander
  • Bone condense
  • Bone split
  • Evaluate tool before placement of Compressive implants
  • With optional instrument as a set for placement of Compressive implants.

esbipro

Arrow
Arrow
Slider