Interface

Handy interface of special holder for comfortable intraoral work

 

Surface

Polished surface is anodised to the natural gingiva colour

 

Internal thread

Alowing to remowe the gingiva former using SR tool without excessive pressure on the implant

 

Two piece

Gingiva former consists of a body and fixing screws what is allow to exclude transmitting unwanted torque the implant when twisting of the cone the connection until the implant is in the early stage osseointegration

Roott Gingiva former

Colorful Roott Gingiva Formers

GF1 GF2
GFN2
GF3 GF4
GFN4

Tvirtinimo varžtas

Has a height-dependent color code and covers a former like an implant cover screw preventing the ingress of food

Gingiva Formers

GF1 1 mm
GF2 2 mm
GF3 3 mm
GF4 4 mm

Anatominiai dantenų formuotojai

Tinka visais atvejais, išskyrus siauras ertmes ir kai naudojamos tiesios atramos su rutuliniais priedais. Aukštis parenkamas pagal dantenų biotipą. Formuotojo forma atitinka atitinkamo dydžio anatominių ir transgingivalinių atramų gingivalinę dalį.

Anatomical Gingiva Formers

Narrow Gingiva Formers

GFN2 2 mm GFN4 4 mm

Siauri dantentų formuotojai

Naudojamas tais atvejais, kai nepakanka vietos įterpti anatominę atramą ir suformuoti dantenas naudojant tiesias atramas su rutuliniais priedais.

Narrow Gingiva Formers


GFI

Individualus dantenų formuotojas

Naudojamas sukurti reikiamą dantenų kontūrą estetiškai svarbiose srityse, paprastai derinamas su chirurgine dantenų kontūro korekcija. Jei reikia, gali būti naudojamas kaip laikinoji atrama. Pagamintas iš biologiškai suderinamo plastiko. Pristatomas su S8 tvirtinimo varžtu.

Individual Gingiva Former

Should be used in all cases. Supplied with ST transfer screw. Available in standard (TO, 11.5 mm) and short (TOS, 6.5 mm) versions. Surface is polished and anodized to green color to add contrast during impression taking. Ti6Al4V material.

 

Conical connection

Together with hex allows you to transfer the exact position of the implant into the laboratory model. In some cases, due to the taper lock it’s possible to use a transfer for close tray.

 

Interface

With impression material has special configuration, allowing you to evenly distribute the material around the interface.

 

Internal thread

Simple transfer removal with a removable key (SR), eliminating undesired force on the implant in case of extra fixation

Transfers for open tray

Transfers for open tray

Transfers for open tray

Two versions for different techniques of impression taking: Via a plastic transfer cap TC, placed on transfer TR Via direct impression taking from a transfer TOD. Surface is polished and anodised to green color to add contrast during impression taking. Material – Ti6Al4V.

 

Interface

Precise fixation with a click by the inner ring between transfer and transfer cap

 

Internal thread

Simple transfer removal with a removable key (SR), eliminating undesired force on the implant in case of extra fixation

 

Internal threadConical connection

Together with hex allows you to transfer the exact position of the implant into the laboratory model. In some cases, due to the taper lock it’s possible to use a transfer for close tray.

Transfers for close tray

Transfers for close tray
TR

Transfers for close tray
TC

Straight transfer for close tray

Is used when there is insufficient clinical height in the distal parts of the upper and lower jaws and when implant axes diverge by up to 20°. Supplied with SL8 laboratory fixing screw. The innovatory plastic cap fixation system provides an accurate cast comparable with open tray transfer. The semicircular cutout matches the anti-rotation slot and allows several transfer caps to be placed in a narrow space.

Straight transfer for close tray

Straight transfer for close tray
TOD

Transfer for direct impression taking

Transfer for direct impression takingTransfer for direct impression takingTransfer for direct impression taking